A 200W AC/DC LED driver featuring the dual mode constant voltage and constant current output. The LED driver operates from 100~305VAC and offers models with different rated voltage ranging between 12V and 24V. Thanks to the high efficiency up to 92%, with the fanless design, the entire series is able to operate for -40°C ~ +90°C case temperature under free air convection. The design of metal housing and IP65 ingress protection level allows this series to fit both indoor and outdoor applications.
- Constant Voltage and Constant Current mode output
- Metal housing design
- Built-in active PFC function
- No load / Standby power consumption <0.5W
- IP65 rating for indoor or outdoor installations
- Typical lifetime > 50000 hours
- 5 year warranty
Specifications
Output Specifications
Output Voltage:
24V
Constant Current Region:
12 ~ 24V
Voltage Tolerance:
±2.0%
Output Current:
8.4A
Rated Power:
201.6W
Input Specifications
Input Voltage:
100 ~ 305VAC
Frequency Range:
47-63Hz
Inrush Current:
Cold Start 60A (Twidth=510μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
Efficiency (Typ.):
92%
AC Current (Typ.):
1.2A / 230VAC
Leakage Current:
<0.75mA / 277VAC
Power Factor:
PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC @ full load
Protection
Short Circuit:
Hiccup mode, recovers automatically after fault condition is removed
Over Voltage:
27 ~ 34V. Shut down output voltage, re-power on to recover
Over Current:
95 ~ 108%. Constant current limiting, recovers automatically after fault condition is removed
Over Temperature:
Shut down output voltage, re-power on to recover
Environment
Working Temperature:
Tcase= -40°C to +90°C
Working Humidity:
20 ~ 95% RH non-condensing
Storage Temperature, Humidity:
-40°C to +90°C, 10 ~ 95% RH
Temperature Coefficient:
±0.03%/°C (0-50°C)
Vibration:
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
Safety & EMC
Safety Standards:
EN61347-1, EN61347-2-13 independent, EN62384
Withstand Voltage:
I/P-O/P:3.75KVAC, I/P-FG:2.0KVAC, O/P-FG:1.5KVAC
Isolation Resistance:
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C / 70% RH
EMC Emission:
Compliance to EN55015, EN61000-3-2 Class C (@load≧50%); EN61000-3-3
EMC Immunity:
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV)
Other Specifications
IP Rating:
IP65
Size:
244 x 71 x 37.5 mm
UOM:
EA
Weight:
1.22 kg